قسم الهنــدسـة

السلام عليكم


من الأشياء المهمة لدى الطلبة الخريجين المقبلين على عمل مشاريع للخرج من كلياتهم الاطلاع على مشاريع سابقة وافكار سبق انجازها من طلاب أخرين، لذلك احببت أن اجمع لكم بعضا من مشاريع التخرج لطلبة كلية الهندسة في جامعتي تخصص هندسة الحاسب

أمل ان تنال اعجابكم وتقديركم

سافرد مشاركة لكل مشروع فارجو ان تعذروني ان تاخرت بالرد على مشاركاتكم لانشغالي..


علما ان المشاريع تم انتقائها من هذه الصفحة:

http://eng.najah.edu/ar/graduation_projects

المشروع الاول:

Controlling Hydraulic Robot Arm

السنة الأكاديمية: 2010
Supervisors:
رائد القاضي
الطلاب:
اسامة زعرور
محمد ملالحة
القسم:
هندسة الحاسوب
الملفات:
application/msword icon
Osama_Zarour_and_Mohammad_Malalha.doc

We Tried To Make our Hydraulic Arm To achieve the following Competitions:

reach the greatest distance to deliver a given object
pick up the heaviest possible object
deliver the most objects in a given amount of time
function in an assembly line
Pick up Objects based on colors.
battle against another arm for an object
rotate as well as reach and grab


Hardware modules:
Every thing from scratch.
we make initial designs and a lot of testing since our knowledge in mechanics is limited ..

We use old VCR ,Voice recorder ,CD ROM, old wall clocks gears , table clocks gears, medical syringes, wood…etc

We use PIC18f4620 microcontroller with its built in PWM capability to control the 5 DC motors on the arm.
We tried to reduce cost of electronic parts by using a relay-based technique , that works fine instead of using many Microcontrollers and H-bridges, which costs a lot!.

المشروع الاول:

Controlling Hydraulic Robot Arm

السنة الأكاديمية: 2010

Supervisors:
رائد القاضي

الطلاب:
اسامة زعرور
محمد ملالحة

القسم:
هندسة الحاسوب


الملفات:

Osama_Zarour_and_Mohammad_Malalha.doc

We Tried To Make our Hydraulic Arm To achieve the following Competitions:

reach the greatest distance to deliver a given object
pick up the heaviest possible object
deliver the most objects in a given amount of time
function in an assembly line
Pick up Objects based on colors.
battle against another arm for an object
rotate as well as reach and grab


Hardware modules:
Every thing from scratch.
we make initial designs and a lot of testing since our knowledge in mechanics is limited ..

We use old VCR ,Voice recorder ,CD ROM, old wall clocks gears , table clocks gears, medical syringes, wood…etc

We use PIC18f4620 microcontroller with its built in PWM capability to control the 5 DC motors on the arm.
We tried to reduce cost of electronic parts by using a relay-based technique , that works fine instead of using many Microcontrollers and H-bridges, which costs a lot!.

Bee CRM

السنة الأكاديمية:
2010


Supervisors:
هيا سماعنه

الطلاب:
اسامة زعرور
محمد ملالحة


القسم:
هندسة الحاسوب


الملفات:

BeeCRM_Documentation.ppt

Customer Relationship Management (CRM) is an information industry term for methodologies, software, and usually Internet capabilities that help an enterprise manage customer relationships in an organized and efficient manner. In many cases, an enterprise builds a database about its customers. This database describes relationships in sufficient detail so that management, salespeople, and customer service reps can access information; match customer needs with product plans and offerings; remind customers of service requirements; know what other products a customer had purchased; etc

المشروع الثالث:


3D Scanner


السنة الأكاديمية:
2010


Supervisors:
علاء الدين المصري


الطلاب:
بشار معلا
احمد خضر


القسم:

هندسة الحاسوب


الملفات:

3D_Scanner.ppt

The main idea behind this project is to obtain the outer surface of the object . so the straight forward way that we considered is to slice the object to thin slices using a laser pointer formed into a line and aimed into the object, this laser line will take the outer shape of the thin part of object at this moment a camera positioned at a known angle captures an image of the object. And send it somehow to the PC “to be tilled later” , then rotate the object so that laser line covers another part of the object, repeat these steps until the whole object is scanned .

المشروع الرابع:


Air Mouse

السنة الأكاديمية:
2010

Supervisors:

أنس طعمة


الطلاب:

مجدولين ابو طاقة
تودد صوص


القسم:
هندسة الحاسوب


الملفات:

Abstract.docx

GRADUATION_PROJECT.ppt

The system can be used as an input device for computers. Computers can interpret the hand movement as a mouse movement. This also can replace the way how we type through a keyboard, by following and recording fingers movements to detect what letter they pressed (On a virtual keyboard, maybe) or people could simply move their finger as they normally write with a pen, and the system can detect what letter they are writing and write it down!

People can also have collaborative working environment by creating more than one virtual keyboard and start working and typing into a document! This is also possible with drawing, designing, modeling and any kind of collaboration needed.

This will open a new whole level about how operating systems and programs can be developed with the 3rd Dimension implemented and how people can move around with the operating system.

This system also can replace mouse, keyboard, and the costly Multi-touch screens!

Active manger

السنة الأكاديمية:
2010
Supervisors:
لؤي ملحيس
الطلاب:
فكر طوباسي
القسم:
هندسة الحاسوب
الملفات:
AN.doc

اسم المشروع: Arabic OCR

السنة الأكاديمية:
2010
Supervisors:
رائد القاضي

الطلاب:
ديمه شواهنه
ايات ياسين


القسم:
هندسة الحاسوب


الملفات:

summary.docx

CRM DB Analysis

السنة الأكاديمية:
2010

Supervisors:
رائد القاضي


الطلاب:
بشار معلا
محمد عبد الله


القسم:
هندسة الحاسوب


الملفات:

DB_Analysis.docx

اسم المشروع:

Controlling Class Rooms and Taking Students Attendance

السنة الأكاديمية:
2010

Supervisors:
رائد القاضي


الطلاب:
منى ضميدي
مي طبيله


القسم:
هندسة الحاسوب


الملفات:

muna_and_mai_documentation.docx

Teachers are responsible for taking students attendance at the beginning of each lecture and this will waste a lot of time, so our project main objective is to save time and money by making your system computerized.
In our project we developed a system that controls all rooms at the university and takes students attendance automatically based on time.
This small system got two parts one of them is attached to each room at the university, the other part will be connected to the main server

اسم المشروع:
Class Net Exchange -CNX-



السنة الأكاديمية:
2010


Supervisors:
رائد القاضي
الطلاب:
لما ياسين
اسماء عفيفي

القسم:
هندسة الحاسوب


الملفات:

CNX_documentation.doc



CNX : Class Net Exchange
Enjoy your lesson wherever you are
Using CNX you can participate in the lesson , even if you are at home, all what you have to do is to download the student version of the program and enter the lesson and even you can ask the teacher to help you with your computer.
Our project is a network application that allows students every where to learn, share, and also ask the teacher to help them with their computers , this makes the work easier and more organized up to the level of current advanced technology